M-115 Antistatic Slip-resistant Particle Gloves
Functions:
- Made of synthetic long fibers and conductive fabrics that minimizes formation of particles (avoid powder dust formation).
- A layer of PU membrane is stuck on palm part of the glove which would not decrease the comfort or limit finger movement.
- No finger marks left resulted from hand sweat.
Usage:
- IC, packing industry, testing, SMT, and food industry, etc.(Class 100)
- PU glue-laminated gloves (better sweat absorbency/excretion, elasticity, slip-resistance, and non-fur).
|
|
M-118 Antistatic Slip-resistant Particle Gloves
Functions:
- This model of gloves may disperse current from 5000 volt to 0 volt within 0.3 seconds.
- The gloves may maintain surface resistance of 106-107Ω/square after 100 times of washing, which provides great protection from hazardous pollutants.
- This model of gloves is made of synthetic long fibers that minimize formation of particles (avoid dust formation).
Usage:
- PCB plant, IC plant, electronics industry, precise assembly industry, chemical engineering, mining, electricity, and gunpowder industries, etc.
- Recommended to be used in clean environment of Class 1000.
- The glove is able to be repeatedly cleaned in 40°C water with neutral detergent. Do not use oxidizing detergents containing chlorine.
|
|
M-135 Seamless PU Gloves
Functions:
- This product features close sealing design with no dust formation, which is almost as ideal as rubber gloves.
- Gas permeable PU film and water-absorbing long fibers enable more comfortable wearing.
- High elasticity property makes it easier to wear and remove.
Usage:
This product is suitable for class 10 and over clean rooms such as that in TFT/LCD plant, original component assembly plant and testing plant, etc.
|
M-112 Knitting Inner Gloves
Functions:
- Made of synthetic long fibers, minimizing formation of micro-dust (avoid dust formation).
- Special weaving knit enables better elasticity of the gloves, perfectly fitting hand shape of users.
- Applying fine gauge machinery to achieve the ultra-thin requirements.
- The half-finger design would not limit finger movement, maintaining sharp touching sensitivity of finger tips which is more beneficial to precisely delicate works.
Usage:
This product is used in clean rooms. Extensively used in various plants such as IC, semiconductor, assembly and testing, electronic components, and packing, etc. using with PVC , Latex, or Nitrile gloves.
|
|
M-117 PU Finger-tips Glove
Functions:
- Made of long fibers, minimizing formation of micro dust (without dust).
- Special weaving knit enables better elasticity of the gloves, perfectly fitting hand shape of users.
- Applying fine gauge machinery to achieve the ultra-thin requirements.
- Applying stereo molding with processed finger-tip glue rubber which would not decrease comfort or limit finger movement, lowering cost and increasing work efficiency.
Usage:
This product is used in general class of clean rooms. It is for use of general plants such as electronic components assembly, component testing, electronic components, and packing, etc.
|
|
M-136 Static Dissipative Glove
Functions:
- Made of synthetic long fibers, minimizing particle formation (without dust).
- M-135 is made of integral forming glove weaving machine, providing seamless and durable features.
- Surface resistance of static dissipative glove is about 106 to 107Ω/square with excellent static dissipative efficiency.
Usage:
- For industries such as PCB, IC, electronics, semiconductor, precise assembly, chemicals, mining, power generation plant, gunpowder industry and industries required static protection, etc.
- The glove is able to be repeatedly cleaned in 40°C water with neutral detergent. Do not use oxidizing detergents containing chlorine.
|
M-110 Latex Glove
Specifications:9"/12"
Packing:50 pairs/pouch, 10 pouches/carton
|
|
M-111 PVC Glove
Specifications:9"/12"
Packing:50 pairs/pouch, 10 pouches/carton
|
|
M-137 NITRILITE Ultra-thin Glove
Specifications:S/M/L
Packing:100 pcs/box,12 box/1ctn
|