Lamps with ceiling structure design are fixed under the skeleton of ceiling grid, not spoiling the structure of clean rooms, therefore, would not affect the operation system for air-proof control of outside and inside clean rooms. Main unit of the lamps have great sealed property without any seams, presenting smooth connection with the skeleton of ceiling grid without dust accumulation.
Tear-Drop Lamps
Benefits Briefing
- Maintain the requirement for air-proof of clean room
- Secure structure with particularly great anti-erosion property
- Great sealed property of the lamps
- Minimized effect of airflow
- Static prevention function
|
|
Embedded Type Lamps
Features Briefing
- Installed T-bar dimensions may be made in accordance with system specifications of T-bar or ceiling grid on-site.
- Base unit and frames are designed with closed structure to completely separate the air convection of inside and outside ceiling, ensuring cleanliness of the room. (Figure 1)
- Materials for lamp reflector may be clear diamond, acrylic sheet, PC sheet, plate tempered glass to suit with purposes for various locations.
- All power cord holes are embedded with special jackets to avoid spoiling air-proof of lamp unit.
- Lamp reflector and base unit are connected with springs for easy removal and maintenance.(Figure 2)
- Suitable for plants with laminar flow or turbulent flow air conditioning systems required class 100 to 100000 of cleanliness, lamp installation method results in minimal effect on airflow circulation.
Material Specifications
-
Material/Painting:
Base Unit: Cold rolled steel sheet/White baking paint
Lamp Reflector: Acryl (custom-made available for PC or tempered glass )
Lamp frame: Aluminum extrusion
-
Specifications
EB/EB-2 Active Power Factor Correction Electronic with 98% power factor at 120V/220V
Applied light source:
20/18W、40/38W/Apollo 3-wavelength fluorescent tubes
20W、40W/yellow-light tubes for semiconductors
14W、28W/T5 High-efficiency tubes
-
Installation/Fixation
T-bar type
Ceiling grid system
|
|
Specific Lamps for PIC/S Plants
Features Briefing
- Secure and durable structure of lamps, connections among both sides of base unit and four corners of lamp reflector leave no any seams, presenting closed structure design of elegant appearance without light leak. (Figure 1)
- Front frame is made of cold rolled steel sheet with argon welding molding, secure, neat, smooth, avoiding dust adhesion.(Figure 2)
- Lamp reflector is made of special tempered glass, avoiding dust adhesion and suitable for chemical gas-resistant locations which is easy to be cleaned and care/maintenance.
- Lower energy consumption while worked with electronic stabilizer, achieving over 20% of power-saving efficiency.
- All power cord holes are embedded with special jackets to avoid spoiling air-proof of lamp unit.
- Installed lamp quantity may be one, two or three.
- Suitable for plants with laminar flow or turbulent flow air conditioning systems (ceiling type may apply to turbulent flow only) required class 100 to 10000 of cleanliness, lamp installation method results in minimal effect on airflow circulation.
- Applied clean room class
16/21 series; Class 100
20 series: Class 1000
Material Specifications
-
Material/Painting:
Base Unit: Cold rolled steel sheet/White baking paint
Lamp Reflector: Tempered glass
-
Specifications
Stabilizer:
EB/EB-2 Active Power Factor Correction Electronic with 98% power factor at 120V/220V
Applied light source:
40/38W/Apollo 3-wavelength fluorescent tubes
40W/yellow-light tubes for semiconductors
28W/T5 High-efficiency tubes
-
Installation/Fixation
16 Series Embedded type (down-lift maintenance)
20 Series Ceiling type (down-lift maintenance)
21 Series Embedded type (up-lift/down-lift maintenance)
|
|
Specific Lamps for Embedded Flap
Features Briefing
- This product is suitable for clean rooms with ceiling or flap design.
- This product is made of seamless design with sealing nut on power cord outlet, completely isolating air filled with dust.
- Lamp reflector is made of clear or milk white acryl, featuring non-deformation, constant transparency and dust-proof.
|
|
Installation Method
Optional Models Description
Lamp reflector |
Stabilizer |
Tube |
Color |
Voltage |
Dimensions (mm) |
1:Clear acryl
2:Yellow acryl |
E:Electronic |
A:32/36/38/40/45w x2
B:32/36/38/40/45w x3 |
W:White tube
Y:Yellow tube
O:Others |
1:110V
2:220V
3:277B
4:208V
O:Others |
1:1296 x 260 x 100
2:1366 x 366 x 190
(L x W x H) |
Note: Dimming stabilizer may be used with 36W/220V tubes.
|